Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I used "Data2Unified Add-in V1_3_0_0" and I converted my project.

Created by: rdoliveira at: 10/18/2021 2:17 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

10/18/2021 2:17 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 3/30/2023 Posts: 1260 Rating: (120)	Hello, I used "Data2Unified Add-in V1_3_0_0", with TIA Portal Version 16 update 4, from a TP1200 to MTP1200. And I converted my project. Now I'm installing Version 17 update 1, and I was wondering, if I need to convert my project from TP1200 to MTP1200 again, if there is any difference in "Data2Unified Add-in v V1_3_0_0" that would be the same, compared to V17? or just open the MTP project in version 17.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

10/19/2021 4:16 PM	Rate (0)
Stefán Már Jónasson Experienced Member Joined: 2/13/2020 Last visit: 1/28/2023 Posts: 54 Rating: (10)	I would say just open the project in V17, I upgraded my V16 project that way without any problem. But I started from scratch with the V16 project so I´ll be waiting for results :)

Suggestion To thank Quote Answer

10/19/2021 5:13 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 3/30/2023 Posts: 1260 Rating: (120)	Stefán Már Jónasson I would say just open the project in V17, I upgraded my V16 project that way without any problem. But I started from scratch with the V16 project so I´ll be waiting for results :) Hi, I converted the project, it's a lot to start from scratch, with Unified.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

3/24/2022 7:36 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 3/30/2023 Posts: 1260 Rating: (120)	Hello, Data2Unified, there is already a version 2 for 17. LINK
	Last edited by: rdoliveira at: 03/24/2022 19:38:22 Last edited by: Jen_Moderator at: 03/25/2022 11:00:09 Optimized link. "Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC WinCC Unified

Follow us on