Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I want to establish a connection to Scada via IEC60870-5-101 protocol

Created by: rezajan55 at: 9/7/2009 3:20 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/7/2009 3:20 PM	Rate (0)
rezajan55 Posts: 45 Rating: (1)	Dear experts, I want to establish a connection to Scada via IEC60870-5-101 protocol. My hardware comprises: CPU412-2 andCP441-2. I want to know if a lisence provided by siemens to do so or any HW-Dongle is needed to load the driver?
rezajan55 Posts: 45 Rating: (1)	Last edited by: O_Moderator at: 9/7/2009 3:23 PM new subject atfer spölitting
Suggestion To thank

9/9/2009 10:10 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/10/2024 Posts: 4114 Rating: (195)	Thread closed, because question is already discussed in the thread with the subject i want to establish a connection to Scada via IEC60870-5-101 protocol... You can find it within the conference Communication / Networks Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on