Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I WANTS TO READ THE POSITION OF AXIS

Created by: babu_83 at: 12/28/2008 8:24 AM (12 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

12/28/2008 8:24 AM	Rate (0)
babu_83 Posts: 18 Rating: (0)	HI ALL I WANTS TO READ POSITION OF AXIS IN PLC PROGRAM LIKE 802D , IT IS POSSIBLE IN 840D , AND HOW TO READ THE POSITION OF EACH AXIS IN PLC, PLEASE END THE PROCEDURE BY B.BABU
babu_83 Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

12/29/2008 7:03 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi You can try with 570X 0000. Good luck Nit

Suggestion To thank Quote Answer

12/29/2008 8:13 AM	Rate (0)
mandy82_india Posts: 8 Rating: (0)	hi nit can u please explain it in detail. or ADDRESS, where i can read the postion. babu
mandy82_india Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

12/29/2008 4:46 PM	Rate (0)
Kutty Posts: 16 Rating: (0)	IS this AMW Babu? Dai ballllllllllllll, This is ILayaraj This is my mobile numer take it, 092813 08616 Ask Directly.
Kutty Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

12/30/2008 11:06 AM	Rate (0)
OvidiuNastac Silver Member Joined: 1/29/2008 Last visit: 7/26/2022 Posts: 419 Rating: (19)	Hi I understand that you want to read a position of an axis in PLC. So you can read it with IS V570X0000 where X is the axis number. Good luck Nit

Suggestion To thank Quote Answer

12/30/2008 3:32 PM	Rate (0)
zub Posts: 5 Rating: (0)	Hello if you want read actual positionfor exampleaxis X (your index this axis is e.g. 1). So you must send request for actual value V26000001.1 must be set 1 and VD57000000 (for axis X)move to your MD variable. By zub
zub Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

12/31/2008 12:56 PM	Rate (0)
babu_83 Posts: 18 Rating: (0)	i wants to read in 840D and in 802d, so please tell me in 840d
babu_83 Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/14/2009 9:50 PM	Rate (0)
fas Posts: 4 Rating: (0)	In the 840D system you can read out the axis positions using NCVAR selector only. The best regards
fas Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

1/20/2009 2:35 PM	Rate (0)
babu_83 Posts: 18 Rating: (0)	thanks for your reply , please tell me in detail
babu_83 Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

1/20/2009 2:59 PM	Rate (0)
Sergiorod Posts: 1 Rating: (0)	Hello from Portugal ! You have to use FB2 (GET)on PLC to make a call to the CNC. It's not easy because you need to create a DB with the right struture to call the correct variable. You can also try to use the NC VAR SELECTOR.
Sergiorod Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on