IM 151-1 IO mod fault

Good day!
I have a module ET200S (6ES7 151-1AA5-0AB0) with the following diagnosis failure:

LED SF and BF flashes 3 x at 0.5 Hz
LED BF flashes 3 x at 1Hz
LED SF AND BF flashes 3 x 2 Hz
LED BF flashes 1 x at 1 Hz

May be some I/O damaged?

Vognach

Good day!
I have a module ET200S (6ES7 151-1AA5-0AB0) with the following diagnosis failure:

LED SF and BF flashes 3 x at 0.5 Hz
LED BF flashes 3 x at 1Hz
LED SF AND BF flashes 3 x 2 Hz
LED BF flashes 1 x at 1 Hz

May be some I/O damaged?

 Hello Vognach,

When you go into the online diagnostic of the ET200S, what does it say?

Give of a printscreen of it please.

Best regards,

Hugo

Hello,

Perhaps the attached file might help.

hi,

I/O module The configured structure of the ET200S does not match the actual structure of the ET 200S. The first slot that displays a configuration error (missing module, incorrect module module fault) is displayed. This error is only output if the parameter "Operation at preset <> actual configuration" is locked.

Check the structure or the configuration of the ET 200S, whether a module is missing or defective, or whether an unconfigured module has been inserted.

[just copy and paste]

reagards,

Hi!

There was a card damaged input, and prevented the visualization of all modules.

Thank you for your help!