Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IM151-8 & S110 & TIA Portal

Created by: jeanmy at: 11/13/2015 2:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/13/2015 2:19 PM	Rate (0)
jeanmy Advanced Member Joined: 3/4/2010 Last visit: 5/24/2023 Posts: 81 Rating: (0)	Hello Here is my setup 1 ET200S IM151-8 PN / DP (ref: 6ES7 151-8AB01-0AB0 ) 1 S110 Control Unit (ref : 6SL3040-0JA01-0AA0 ) . I want TIA program version V13 SP1 Update 5 . I think the uitilise SINA_SPEED function (FB285) I only speed control . I look for a sample program

Suggestion To thank Quote Answer

11/13/2015 2:51 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 5/26/2023 Posts: 21494 Rating: (2851)	Hello, which TIA Packages you have exactly? (For the IM151 you need Step Professional TIA V13). For the S110 you need Starter, this drive type is not supported in TIA , so install the GSDML for the communication configuration, the configuration of the drive you must do with the STARTER. Regards Christoph

Suggestion To thank Quote Answer

11/13/2015 3:28 PM	Rate (0)
jeanmy Advanced Member Joined: 3/4/2010 Last visit: 5/24/2023 Posts: 81 Rating: (0)	yes I installed the GSDML file S110 . I look for a exmple of using the FB285

Suggestion To thank Quote Answer

11/13/2015 3:50 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 5/26/2023 Posts: 21494 Rating: (2851)	manual: https://support.industry.siemens.com/cs/ww/en/view/109475044 example: https://support.industry.siemens.com/cs/ww/en/view/98961635

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on