Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IM153-4 and Siwarex U

Created by: protivogas at: 5/8/2012 6:26 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/8/2012 6:26 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	Found the following problem... IM153-4(PN) with 5 Siwarex modules when power off and then power onstandon SF... the module doesn't see. Restart of the processor module doesn't help... only removal and repeated installation of the module from the tire eliminates SF In the similar project the same only with one Siwarex module after inclusion the mistake doesn't arise and everything remarkably works.

Suggestion To thank Quote Answer

5/8/2012 7:30 PM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 2/19/2024 Posts: 726 Rating: (71)	What does Module Information says?

Suggestion To thank Quote Answer

5/9/2012 9:49 AM	Rate (0)
Wishme Experienced Member Joined: 8/20/2009 Last visit: 11/6/2024 Posts: 80 Rating: (5)	Dear, After power up, pls check if the program blocks are available in the CPU. Also, check whether after power recycleonline program is matching with the your backup program. May be program in flash card is different. Check also that the Scale and Vector DB does not initialize on power up. Vishp.
	Vishme. Hang on...may be we drop a step before Success.
Suggestion To thank Quote Answer

5/9/2012 12:24 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	missing module in slot 1,2,3,4,5,6,7,8

Suggestion To thank Quote Answer

5/9/2012 12:28 PM	Rate (0)
protivogas Regular Member Joined: 3/14/2009 Last visit: 11/29/2021 Posts: 9 Rating: (0)	VishP Dear, After power up, pls check if the program blocks are available in the CPU. Also, check whether after power recycleonline program is matching with the your backup program. May be program in flash card is different. Check also that the Scale and Vector DB does not initialize on power up. Vishp. I have no problems with program start... other 7 racks with IM153-4 are normally initialized and work... and two racks work through WDS on a wireless network and from thempower is periodically removed... so afterpower restorating they are synchronized and work... the unique rack with which is a problem it is that where weight modules are established Attachment HW.jpg (158 Downloads)
	Last edited by: protivogas at: 5/9/2012 12:41 PM Last edited by: protivogas at: 5/9/2012 12:29 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on