Industry Online Support
Technical Forum
7/20/2011 1:32 AM | |
Joined: 9/27/2006 Last visit: 10/5/2024 Posts: 12283 Rating: (2685) |
Hello Rojas; You will find much information on the IM 308C in the followiong manual, along with details on Com Profibus (the software needed to parametrize the IM 308C as a Profibus node): https://www.sea.siemens.com/us/internet-dms/ia/AutomationComm/Automation/Docs/505-8206-2.pdf Complementary information can be found here: ftp://ftp.enm.com/Support/Siemens/S5/Manuals/All%20the%20mauals%20are%20here/ET200UEN.PDF Hope this helps, Daniel Chartier |
Last edited by: dchartier at: 7/20/2011 1:42 AMAdded second link. |
|
This contribution was helpful to1 thankful Users |
Follow us on