Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IM308C

Created by: ambrish at: 8/22/2007 7:55 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/22/2007 7:55 AM	Rate (0)
ambrish Bronze Member Joined: 11/8/2006 Last visit: 3/16/2023 Posts: 57 Rating: (4)	Dear All I have installed COM PROFIBUS V 5.1 in my PG.But I am not able to communicate with IM308C as I want to import original setting & than after making few changes in original setting,I wanted to export to IM. Requesting you to give your suggestions. Thanks Ambrish
	Last edited by: ambrish at: 23.08.2007 11:56
Suggestion To thank

8/29/2007 11:12 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 2/16/2023 Posts: 2705 Rating: (311)	Hi, As mentioned later, please check the versions of COM PROFIBUS V5.1...
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank

8/31/2007 11:59 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 5/24/2023 Posts: 4099 Rating: (192)	closed: also discussed within this thread: COM PROFIBUS V 5.1within the conference Decentral Peripherie Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on