Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Import project from WinCC flexible to WinCC V6.0 SP4

Created by: Nene at: 7/26/2007 2:45 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/26/2007 2:45 PM	Rate (0)
Nene Posts: 35 Rating: (0)	Hi, I want to import a project (graphics, tags, alarm and tag logging, ...) into WinCC V6.0 SP4, from an WinCC Flexible project! Is there an easy way of doing this? If so, what are the main problems involved. Thanks in advance,
Nene Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

7/26/2007 3:05 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi sorry, normally user try to migrate from WinCC to WinCC flexible http://support.automation.siemens.com/WW/view/en/18796902 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

7/27/2007 10:58 AM	Rate (0)
Nene Posts: 35 Rating: (0)	Hi, Thks Nemo, I understand that usually the migration is from WinCC / Protool to WinCC flexible, but in this case We have a project in WinCC flexible and we want to integrate it in our WinCC V 6.0 global project. Is there any way of migrating something (tags, graphics, ...) from flexible to V 6.0 ??
Nene Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

7/27/2007 7:42 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi well I fear you going the wrong direction for migrating data => you can check the following tools for converting /importing data to WinCC http://support.automation.siemens.com/WW/view/en/13681075 You should search the FAQ for "flexible export" and "WinCC import" nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on