Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Indexing Axis

Created by: ŠΜS at: 8/16/2011 3:13 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

8/16/2011 3:13 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Hi, I am using an indexing axis for Milling head axis positioning. For that I have changed the below parameters, 30500 = 2 10920 = 60 ( Here I need 360 positions) 10930 (0)= 1 10930 (1) =2 like wise up to tab 59 My problem is in parameter 10920 I need 360 position, My milling head will rotate 360 Degree,distance between every position is 1 degree. But Here only 60 positions can be entered. So presently milling head rotates upto 60 degree & the rotates continuously and stop in 1 degree. I need to Index the head in total 360 degree, with 1 degree interval in indexing axis . Is it possible…..
	Regards, ŠΜS
Suggestion To thank Quote Answer

8/16/2011 3:38 PM	Rate (1)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating: (64)	Hi. What if: 30500 = 3 30501 = 360 30502 = 360 30505 = 1 Best regards.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ŠΜS

8/16/2011 6:22 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	pfuser Hi. What if: 30500 = 3 30501 = 360 30502 = 360 30505 = 1 Best regards. Thanks Pfuser now it is working.
	Regards, ŠΜS
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on