Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Indexing the 'header' tag for the faceplate

Created by: MTDS at: 4/26/2011 1:57 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/26/2011 1:57 AM	Rate (0)
MTDS Posts: 1 Rating: (0)	Hello, I'm new in using WinCC flexible. So, I use the WinCC flexible 2008 and HMI OP 277 6''. On a screen I have several buttons that invokes a particular faceplate. My question is whether there is the possibility of indexing the header tag for the faceplate and the faceplate on the screen join another part of the tag that is common to all faceplate of a particular object? Therefore I need not carry the same faceplate of the same object on multiple screens. In attached a figure to explain better. Thanks Attachment info.JPG (36 Downloads)
MTDS Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/27/2011 11:41 AM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 12/16/2022 Posts: 1557 Rating: (159)	Hello, maybe via a multiplex tag and a symbolic io-field? best regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on