Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

indirect addressing

Created by: Xeren at: 10/4/2005 4:13 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/4/2005 4:13 PM	Rate (0)
Xeren Posts: 5 Rating: (0)	Hello! maybe you know how i can make configuration of PLC from Scada using indirect addressing? i mean that all variables will have a address from Scada ! to make system flexible ! thank you
Xeren Posts: 5 Rating: (0)
Suggestion To thank

10/8/2005 1:07 PM	Rate (0)
Essam Posts: 47 Rating: (0)	How thanks ESB
Essam Posts: 47 Rating: (0)
Suggestion To thank

10/10/2005 8:13 PM	Rate (0)
Dreminee Posts: 58 Rating: (2)	Hello What you can do is the following. Create an interface DB for the scada, then everything regarding to scada is in that DB. This way the systemis clear. Indirect addressing should only be the case when you have no other option. It makes the programm difficult to read for unexperienced users
Dreminee Posts: 58 Rating: (2)
Suggestion To thank

10/11/2005 11:33 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/8/2024 Posts: 4111 Rating: (195)	Closed: cause topic posted twice. Answer copied. Here you will find the second topic with all replies: indirect addressing in PLC siemens
	Last edited by: CS Moderator at: 10/26/2005 9:48 PM Last edited by: CS Moderator at: 10/12/2005 11:45 AM Last edited by: CS Moderator at: 10/12/2005 11:45 AM My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on