Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Industrial Ethernet communication between Microbox 427C and PAC 3200

Created by: aurel18 at: 6/9/2011 10:38 AM (11 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

6/9/2011 10:38 AM	Rate (0)
aurel18 Experienced Member Joined: 3/2/2011 Last visit: 7/19/2024 Posts: 5 Rating: (1)	Dear experts, I have one project with Bundle Microbox 427c I have two ethernet ports : -IE General with IP 192.168.1.10 Profinet IO -IE general with IP 10.202.95.215 for standard Windows internet comunication. Haw can I do industrial Ethernet communication between Microbox 427C and PAC 3200? Best Regards

Suggestion To thank Quote Answer

6/9/2011 10:55 AM	Rate (0)
Moldi Posts: 89 Rating: (7)	Hello, you said you got an bundle of the microbox. So you got the WinAC RTX installed. With this SoftPLC it is possible to do open user communication (OUC). OUC means TCP/IP, ISO on TCP and UDP comm. Have a look to these FAQs to have a better start: http://support.automation.siemens.com/WW/view/en/25209116 http://support.automation.siemens.com/WW/view/en/29737976 regrads, Moldi
Moldi Posts: 89 Rating: (7)
Suggestion To thank Quote Answer

6/9/2011 12:35 PM	Rate (0)
aurel18 Experienced Member Joined: 3/2/2011 Last visit: 7/19/2024 Posts: 5 Rating: (1)	Hello, I already tried to Work with Open wizard but I can not select the IE General only the IF1 IF2 IF3 IF4 from WinAC Please look into attachment Regards Attachment untitled.jpg (517 Downloads)

Suggestion To thank Quote Answer

6/9/2011 8:05 PM	Rate (0)
gre_m Posts: 947 Rating: (45)	Hi I see no reason to use IE General, By IF1..IF4 you can use open communicationby UDP, TCP (see Open Communication via Industrial Ethernet in System Software for S7-300/400 System and Standard Functions 05/2010 A5E02789976-) in manual collection Step 7 May be you can use as Profinet master and in this caseneed step 7 5.5? Try
gre_m Posts: 947 Rating: (45)	Last edited by: gre_m at: 6/9/2011 8:08 PM
Suggestion To thank Quote Answer

6/9/2011 11:32 PM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	Hello Aurel18, do you want to use ModbusTCP for communication? If yes, take a look here. The Modbus package for PN-CPUs runs with WinAC as well. Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)
Suggestion To thank Quote Answer

6/10/2011 2:58 PM	Rate (0)
taxflor Silver Member Joined: 1/26/2011 Last visit: 11/12/2024 Posts: 243 Rating: (67)	For ModbusTCP communication you can try to use this Wizard. http://support.automation.siemens.com/WW/view/de/31535566

Suggestion To thank Quote Answer

6/10/2011 9:37 PM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	bigfoot For ModbusTCP communication you can try to use this Wizard. http://support.automation.siemens.com/WW/view/de/31535566 But the wizard won't help without the Modbus block. Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)
Suggestion To thank Quote Answer

6/11/2011 2:46 PM	Rate (0)
gre_m Posts: 947 Rating: (45)	Hi use UDP protocol. Wizard for generate data block you can find on customer support. Here can find in faq sample for exchange by UDP. You can use and TCP. but TCP much more complicated.
gre_m Posts: 947 Rating: (45)
Suggestion To thank Quote Answer

6/14/2011 11:25 AM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	gre_m Hi use UDP protocol. Wizard for generate data block you can find on customer support. Here can find in faq sample for exchange by UDP. You can use and TCP. but TCP much more complicated. Hello gre_m, PAC3200 is not capable of UDP protocol!!! Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)
Suggestion To thank Quote Answer

6/14/2011 9:39 PM
gre_m Posts: 947 Rating: (45)	Hi Kaulquappe What I wrote about the UDP can be applied to TCP (The same wizard, same FAQ, the same chapter in the manual of SFC )
gre_m Posts: 947 Rating: (45)
Suggestion Quote Answer

|

Share this page:

Share this page on...

Follow us on