Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Insert a Microsoft component in a graphic page

Created by: Mehrnoosh at: 4/19/2006 4:54 PM (5 Replies)

Rating (2)

Thanks 0

6 Entries

4/19/2006 4:54 PM	Rate (0)
Mehrnoosh Posts: 102 Rating: (9)	Hi I try to put a "Microsoft list view control" in my graphic page, but I got this error: Graphic designer License information not found, you do not possess a valid license for the design mode (ListViewCtrl). I have all required WinCC licenses and I can don't have any problem in other machines. I have also checked some other Microsoft components; I have the same problem with some of them in same machine. Thank you in advance. Mehrnoosh
Mehrnoosh Posts: 102 Rating: (9)
Suggestion To thank Quote Answer

4/19/2006 6:12 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (149)	I believe that you need Microsoft Office installed to use this control in design mode [:(]

Suggestion To thank Quote Answer

4/19/2006 10:18 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, Salma is right, for using these microsoft components you need an installed version of office... nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

4/20/2006 7:50 AM	Rate (0)
Mehrnoosh Posts: 102 Rating: (9)	Hi Thanks a lot [:)].When you know what is the problem, it is easy to solve it. Mehrnoosh
Mehrnoosh Posts: 102 Rating: (9)
Suggestion To thank Quote Answer

10/9/2006 5:30 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Hi, If you don't want to install office on every system... but want to use a control that requires office, or at least requires you to have a license, how do you proceed? Is it possible to run a control without office? Are there multiple solutions? Is there a way to get that license? thanks in advance with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

10/9/2006 9:03 PM	Rate (2)
Dec Gold Expert Joined: 5/19/2006 Last visit: 8/5/2023 Posts: 547 Rating: (107)	Hi, For Windows Common Controls 6.0 mscomctl.ocx see KB318597Method 2; For Microsoft Forms 2.0 Controls FM20.dll see KB224305; Dec
	Last edited by: Dec at: 10/9/2006 9:53 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on