Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

integarte of wincc with simatic manager

Created by: decan at: 5/15/2009 9:53 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/15/2009 9:53 AM	Rate (0)
decan Posts: 15 Rating: (0)	Dear all I have installed wincc version 7.0 when i want to integrate wincc from simatc manger Wincc option is not coming in configuratot even i had installed wincc V7.0 even i am geting the mesaage when i will open simatic manger wincc component manager is not installed. so i want to what the problem
decan Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/15/2009 10:09 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 9/14/2023 Posts: 8592 Rating: (1132)	Dear decan, Please have a look at this link: http://support.automation.siemens.com/WW/view/en/11841504 You should install the AS-OS engineering. Best regards, Wizard

Suggestion To thank Quote Answer

5/15/2009 10:15 AM	Rate (0)
decan Posts: 15 Rating: (0)	Dear wizard wincc software which i had installed V7.0 which donot have the option like AS-OS engineer(during installation)
decan Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

5/15/2009 10:43 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 9/14/2023 Posts: 8592 Rating: (1132)	Dear decan, Please insert the WinCC CD and perform an Custom installation. It will detect that you already installed WinCC, but you can install options. Then like in earlier mentioned link: go to Communications and select AS-OS engineering. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on