Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Integration of WinCC in STEP 7

Created by: Waldemar Biscaro at: 1/30/2009 1:38 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/30/2009 1:38 PM	Rate (0)
Waldemar Biscaro Posts: 3 Rating: (0)	Dears, I am working with WinCC V6.0 integrated with Simatic step7. I did the configuration of the communication using the drive SIMATIC S7 Protocol Suite, and everthing it's ok. I want to know, is there somehowto communicate this softwares without use any drive? Is there somehow in the WinCC that can I access the database of Step7 directly (the DB's, inputs and outputs)? Thanks. Best Regards, Waldemar Biscaro
Waldemar Biscaro Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

1/30/2009 6:45 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (278)	Hi Waldemar, The following FAQ describes how to access STEP7 from WinCC. Take a look and see if this is what you are looking for: Ladder rung jump from WinCC Runtime into a specific LAD/FBD/STL network of STEP 7 V5.1 Regards
Phantom75 Posts: 2661 Rating: (278)
Suggestion To thank Quote Answer

2/3/2009 10:55 AM	Rate (0)
Waldemar Biscaro Posts: 3 Rating: (0)	Hi Phantom. First, Thank you for this help. Then, this FAQ is not what I want. It describes how to jump directly to a LAD/FBD/STL program, and monitoring this variables. I want something that integrate the Tag's of WinCC with the memories ofSimatic Step7. I opened a Hotline call, and I'm waiting an aswer for them. After this, I'll post here the solution. If you have another suggestion, I thanks. Best regards.
Waldemar Biscaro Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on