Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Internal System error (error 0x0)

Created by: Pabs at: 10/23/2012 7:55 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

10/23/2012 7:55 PM	Rate (0)
Pabs Posts: 15 Rating: (0)	Hi All, I have been searching for an answer to fix this issue and unfortunately I am still stuck with this error. Here is what I done: -Created project in TIA v10.5 -Upgraded TIA to v11.0 SP2 UPDATE 4 -Open TIA v10.5 project from TIA v11.0 -Went thru the migration process -Compiled without errors When I download to the PLC, the loading process is aborted and the "Internal System Error (error 0x0)" is displayed in the compile window. My system: CPU 1212C v2.2, AI module v1.0, AO module v1.0 I would very much appreciate your advise and support with this issue. Thanks in advance
Pabs Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

10/23/2012 8:02 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/27/2023 Posts: 13080 Rating: (2123)	Pabs Hi All, I have been searching for an answer to fix this issue and unfortunately I am still stuck with this error. Here is what I done: -Created project in TIA v10.5 -Upgraded TIA to v11.0 SP2 UPDATE 4 -Open TIA v10.5 project from TIA v11.0 -Went thru the migration process -Compiled without errors When I download to the PLC, the loading process is aborted and the "Internal System Error (error 0x0)" is displayed in the compile window. My system: CPU 1212C v2.2, AI module v1.0, AO module v1.0 I would very much appreciate your advise and support with this issue. Thanks in advance 1. recompile using the compile (rebuild all blocks) option. 2. reset plc to factory defaults (retain ip address) 3. download program to plc
	science guy
Suggestion To thank Quote Answer

10/23/2012 8:09 PM	Rate (0)
Pabs Posts: 15 Rating: (0)	Hi huggy_d1 Please tell me where in TIA v11 the rebuild blocks function is located and also for step 2, Where do i go to reset plc to factory Thanks very much
Pabs Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

10/23/2012 8:37 PM	Rate (0)
Pabs Posts: 15 Rating: (0)	I found it , followed the steps and it worked! Now i have an issue with the "time and date" field on the HMI (ktp 1000 PN) It shows year 2004 and the time is incorrct also. Any ideas on how to fix this?? Thanks! Pabs
Pabs Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

10/23/2012 8:43 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/27/2023 Posts: 13080 Rating: (2123)	Pabs I found it , followed the steps and it worked! Now i have an issue with the "time and date" field on the HMI (ktp 1000 PN) It shows year 2004 and the time is incorrct also. Any ideas on how to fix this?? Thanks! Pabs There are FAQs on how to get them in sync between the plc and hmi, but the time on the hmi is set in the HMI's control panel (think windows). Exit the runtime, then select control panel, then set the date/time. If you have an NTP server, you can have your profinet config point to that ntp server to set the time.
	science guy
Suggestion To thank Quote Answer

10/23/2012 8:55 PM	Rate (0)
Pabs Posts: 15 Rating: (0)	I went to control panel in my HMI (KTP 1000 basic PN) like you suggested, but there is no "date time" settings available....hum. The following icons are available in my ctrl panel: -Profinet -OP -Password -Transfer -Screen saver -Sound Settings That's it...no setting for time or date...Please help! Thanks again!
Pabs Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

10/23/2012 9:18 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 1/27/2023 Posts: 13080 Rating: (2123)	Pabs I went to control panel in my HMI (KTP 1000 basic PN) like you suggested, but there is no "date time" settings available....hum. The following icons are available in my ctrl panel: -Profinet -OP -Password -Transfer -Screen saver -Sound Settings That's it...no setting for time or date...Please help! Thanks again! Seems I never learn! I made this same mistake months ago in this thread: /tf/WW/en/Posts/72064 No real time clock on the HMI. The thread does go over an option if you really must display time/date info. I took it off my ktp600 template and stopped worrying about it.
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on