Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IO card diagnostic in PLC code.

Created by: gordonene at: 6/22/2015 12:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/22/2015 12:51 PM	Rate (0)
gordonene Posts: 56 Rating: (2)	If I have a IO card with diagnostic for cable fault, how can I load the status into my PLC code? Step7 300 cpu. Can I use a Siemens Standard block and call for the status in the card or something, sameway as you can do with profibus status ?
gordonene Posts: 56 Rating: (2)
Suggestion To thank Quote Answer

6/22/2015 1:23 PM	Rate (0)
eisenpferdreiter Posts: 1058 Rating: (93)	Hello kire, look here for more information on your subject: Diagnostic package PNIODiag for diagnostic evaluation for PROFIBUS DP and PROFINET IO (STEP 7 V5.x) regards
eisenpferdreiter Posts: 1058 Rating: (93)
Suggestion To thank Quote Answer

6/22/2015 3:41 PM	Rate (0)
gordonene Posts: 56 Rating: (2)	Thank you very much !
gordonene Posts: 56 Rating: (2)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on