Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IO field for the TIME variable

Created by: zbynek at: 2/2/2010 3:24 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

2/2/2010 3:24 PM	Rate (0)
zbynek Posts: 14 Rating: (0)	Hello, I would like to get some advice for the following problem regarding SIMATIC S7 and WinCC flexible . There is variable in the Datablock in TIME format. I need the operator to be allowed to see and input value for this variable in the following mask: DD HH:MM:SS where DD, HH, MM, SS stand for DAYS, HOURS, MINUTES, SECONDS. I would appreciate some limit control for the individual inputs fields. Do you have some solution ?
zbynek Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/2/2010 9:11 PM	Rate (0)
Tiago_Tre Experienced Member Joined: 10/30/2008 Last visit: 11/29/2024 Posts: 64 Rating: (2)	Hi zbynek! Read this FAQ topic: https://support.automation.siemens.com/WW/llisapi.dll?query=faq+WinCC+flexible+time+input+&func=cslib.cssearch&content=adsearch%2Fadsearch.aspx&lang=en&siteid=cseus&objaction=cssearch&searchinprim=0&nodeid0=16502685 Good Luck!
	Tiago Martins Machado Joinville - SC - Brasil
Suggestion To thank Quote Answer

2/3/2010 7:21 AM	Rate (0)
zbynek Posts: 14 Rating: (0)	Hi Tiago, There are plenty link on the specified address. Could you be more accurate ? I am not able to find it. Thanks,
zbynek Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/3/2010 11:13 AM	Rate (0)
Tiago_Tre Experienced Member Joined: 10/30/2008 Last visit: 11/29/2024 Posts: 64 Rating: (2)	Sorry! I copy and paste the wrong link this is the correct: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&objId=24104104&objaction=csopen&siteid=cseus&lang=en&skm=
	Tiago Martins Machado Joinville - SC - Brasil
Suggestion To thank Quote Answer

2/4/2010 7:54 AM	Rate (0)
zbynek Posts: 14 Rating: (0)	Hi Tiago, Thanks a lot but my problem is rather different. I need to have some variable of TIME format placed in the DB. Nevertheless I need some IO field where I will beable to input and see this variable in the format I specified above. (DD HH:MM:SS)
zbynek Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/5/2010 12:24 PM	Rate (0)
ranr_mids Bronze Member Joined: 12/5/2005 Last visit: 8/9/2021 Posts: 289 Rating: (19)	Hi. You may need to assign an I/O field for each aspect (Hours, minutes, etc.) and then combine them to get a 'time' value. I know I've worked the other way, splitting the system time down into seperate fields to control how and where it is displayed.

Suggestion To thank Quote Answer

2/5/2010 2:14 PM	Rate (0)
zbynek Posts: 14 Rating: (0)	Hi , That it is. I need the functionality described above. But I would appreciate solution at the WinCC flexible side. Itmeans I expect some VBA script solution.
zbynek Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on