Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IOS 3.2 NODE RED nodes disappear

Created by: MABEO_JEROME at: 2/7/2023 2:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/7/2023 2:14 PM	Rate (0)
MABEO_JEROME Member Joined: 6/24/2021 Last visit: 9/27/2023 Posts: 14 Rating: (0)	Hi, With IOT ADV FS04 and IOS 3.2, when install new node or upgrades with manage palette, lots of nodes disappear. I have the same problem with an other IOT2050 after new installation. just this nodes are available : node-red 2.2.2 48 nodes disable all node-red-dashboard 3.3.1 21 nodes remove disable all node-red-node-intel-gpio 0.0.6-IOT2050 5 nodes update to 0.3.0 disable all Have you an idea for this problem ? Thanks a lot

Suggestion To thank Quote Answer

2/8/2023 3:29 PM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 9/29/2023 Posts: 3261 Rating: (367)	Hi, thanks for reporting! I could reproduce that and contacted R&D. Best regards!

Suggestion To thank Quote Answer

2/9/2023 7:15 AM	Rate (0)
MABEO_JEROME Member Joined: 6/24/2021 Last visit: 9/27/2023 Posts: 14 Rating: (0)	Hi, ok thanks. Bye

Suggestion To thank Quote Answer

2/10/2023 9:55 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 9/29/2023 Posts: 3261 Rating: (367)	Hi, I just started my IOT2050 with the same system I used to test yesterday. Today the nodes are available again... I don't know how this can happen to be honest. Could you check after a reboot again? Best regards!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on