IPC477 and S7-1200 conection

Hi everyone,

I have an IPC477d panel and S7-1200 CPU, I have both are conected with Ethernet wire. I've been trying to get conection with the settings of the PC/PG interface, but I couldn't do it yet

Is it a guide or does someone know how to do it?

Thank so much,

Regards.

Hello,

1.) Which TIA Portal Version and which S7-1200 exactly? (Ordernumber and FW Version)

2.) Can you ping the S7-1200 ?

3.) can you find the S7-1200 in accessible Nodes?

Regards

Christoph

ChristophD

Hello,

1.) Which TIA Portal Version and which S7-1200 exactly? (Ordernumber and FW Version)

2.) Can you ping the S7-1200 ?

3.) can you find the S7-1200 in accessible Nodes?

Regards

Christoph

Thanks for the answer,

well, I have the RunTime V14 SP1 and the S7-1215FC DC/DC/DC

I have the IP, but I can not ping the PLC.

I don't knoe how to search the s7-1200 in accesible nodes..

Thanks so much,

best regards

Hello,

if you can't ping the PLC IP from the IPC then check:

Ethernet connection on IPC (is ot active)
Ethernet Settings on IPC (Same subnet like the PLC)

Regards

Christoph

ChristophD

Hello,

if you can't ping the PLC IP from the IPC then check:

Ethernet connection on IPC (is ot active)
Ethernet Settings on IPC (Same subnet like the PLC)

Regards

Christoph

 Fine! I can do ping now, but I can not conect to S7-1200 yet..

Thank you so much!

ChristophD

how you try to connect?
Have you use the correct settings in PG/PC Interface settings in Windows Control panel?

Sorry for the late answer, I got it. When I could know the IP adress, it just worked. I tryed once more and I could conect. Currently it is working perfectly. Thank you so much ChristphD :)

Best regards.