Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it posible to connect 4 wire transducer to 2 wire AI module 6ES7134-7TD00-0AB0?

Created by: baker.ajmal at: 12/11/2014 10:25 AM (4 Replies)

Rating (1)

Thanks 1

5 Entries

12/11/2014 10:25 AM	Rate (0)
baker.ajmal Regular Member Joined: 4/2/2014 Last visit: 9/11/2022 Posts: 12 Rating: (0)	Hi all, Is it possible to connect a 4-wire transducer to a 2-wire AI module6ES7134-7TD00-0AB0? If possible, please advice the connection wiring diagram. Thanks in advance for your kind help. -- regards AB

Suggestion To thank Quote Answer

12/11/2014 10:36 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	Hello, Not possible. You need a 4 wire card or a Loop powered signal converter. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

12/11/2014 10:49 AM	Rate (0)
baker.ajmal Regular Member Joined: 4/2/2014 Last visit: 9/11/2022 Posts: 12 Rating: (0)	Thank you for your prompt reply. Could you please give some refence of loop powered convertors? thanks in advance. -- regards, AB

Suggestion To thank Quote Answer

12/11/2014 11:11 AM	Rate (1)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	Hello, Something like this one Phoenix MCR Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

12/11/2014 12:29 PM	Rate (0)
baker.ajmal Regular Member Joined: 4/2/2014 Last visit: 9/11/2022 Posts: 12 Rating: (0)	Thank you very much

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Follow us on