Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it possible to connect Climatix PLC directly to WinCC?

Created by: AutoGen_7063273 at: 4/27/2024 12:33 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/27/2024 12:33 PM	Rate (0)
AutoGen_7063273 Joined: 1/8/2024 Last visit: 8/4/2024 Posts: 1 Rating: (0)	Hello, in short, is it possible to connect Climatix PLC directly to WinCC? ------------------------------------------------------------------------------------------ Split from Climatix WinCC connection.
	Last edited by: Jen_Moderator at: 04/29/2024 09:22:52 New subject after splitting
Suggestion To thank Quote Answer

4/30/2024 8:17 AM	Rate (0)
MorofM Member Joined: 10/21/2015 Last visit: 7/15/2024 Posts: 4 Rating: (3)	Hello From Climatix POL6x8 side there is no "out of the box" solution available. Using OPC in a test unfortunately failed. Using Modbus, has not been tried yet.

Suggestion To thank Quote Answer

5/6/2024 6:34 AM	Rate (0)
ZHK Bronze Member Joined: 2/18/2013 Last visit: 7/11/2024 Posts: 139 Rating: (12)	AutoGen_7063273 Hello, in short, is it possible to connect Climatix PLC directly to WinCC? In short - Yes! Over Modbus TCP/IP.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on