Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it possible to connect the CPU928 in the central controller S5-210A and reused the I/O installed in the central controller?

Created by: FADATAMO at: 7/20/2011 3:21 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/20/2011 3:21 AM	Rate (0)
FADATAMO Regular Member Joined: 3/21/2011 Last visit: 12/15/2021 Posts: 5 Rating: (0)	Hi, In the system S5-210A I have a central controller S5-210A III (6ES5 210-2AL11) with a power supply 6ES5 955-3LC13, also I have a CPU 928 (6ES5 928-3UA21) from the S5-135U/S5-155U. I need to know, if it is possible to connect the CPU928 in the central controller S5-210A and reused the I/O installed in the central controller. Best regards, FADATAMO Splitted from S5 110.
	Last edited by: O_Moderator at: 7/20/2011 9:27 AM new subject after splitting
Suggestion To thank

7/20/2011 9:28 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/23/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already published in the following thread S5 210-A. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on