Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it possible to connect TIM 4R-IE or TIM 3V-IE Advanced on 8th or 9th slot of CPU?

Created by: H.Raja at: 5/5/2010 8:22 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/5/2010 8:22 AM	Rate (0)
H.Raja Posts: 22 Rating: (0)	Hi, One of my project has got CPU-317 2DP with 4 CP-DP cards configured on 4th to 7th slot of CPU. Is it possible to connect TIM 4R-IE or TIM 3V-IE Advanced on 8th or 9th slot of CPU?... Please reply asap. Thx in advance. H.Raj Splitted from TIM Module - PLC Config.
H.Raja Posts: 22 Rating: (0)	Last edited by: O_Moderator at: 5/5/2010 10:56 AM new subject after splitting
Suggestion To thank Quote Answer

5/5/2010 4:59 PM	Rate (0)
J_Bell Posts: 5822 Rating: (411)	Dear Raj, I would say it has to work, I see at least no reason why it should not work. You need K-Bus connectivity and you have it at slot 8 or 9 at the CPU rack. You need a S7-Connection resource too...and I guess with 30 available resources, you have all you need. Best regards J_Bell
J_Bell Posts: 5822 Rating: (411)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on