Navigation

Is it possible to convert Wiccflex project to TIA portal WinCC prof v12

Created by: Raymondk at: 10/20/2013 12:43 PM (1 Replies)

10/20/2013 12:43 PM	Rate (0)
Raymondk Posts: 62 Rating: (0)	Good day to you all. I have TIA portal Wincc Prof V12 which the plan is to use on an independent PC for some data collection from a PLC which is connected to a HMI with Winccflex project. 1. I was thinking to reduce eng time I wanted to convert the wincc flex project to the wincc prof v12 in TIA portal. Is this possible. 2. If this is not possible I tried creating a new wincc project but could not find my way around to build a new screen. how to add a screen in wincc pro TIA portal? Thanking you in advance for your time. Regards, Raymond.
Raymondk Posts: 62 Rating: (0)
Suggestion To thank Quote Answer

10/20/2013 2:43 PM	Rate (0)
Amit_86 Platinum Member Joined: 3/18/2008 Last visit: 12/8/2023 Posts: 1750 Rating: (272)	Raymondk Good day to you all. I have TIA portal Wincc Prof V12 which the plan is to use on an independent PC for some data collection from a PLC which is connected to a HMI with Winccflex project. 1. I was thinking to reduce eng time I wanted to convert the wincc flex project to the wincc prof v12 in TIA portal. Is this possible. 2. If this is not possible I tried creating a new wincc project but could not find my way around to build a new screen. how to add a screen in wincc pro TIA portal? Thanking you in advance for your time. Regards, Raymond. Hello, yes, it is possible to migrate project from WinCC Flexible to TIA Portal. Please check this out. WinCC (TIA Portal) -- Working with projects -- Migrating projects Hope this helps.
	VANDE MATARAM.....
Suggestion To thank Quote Answer