Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it possible to have a Profibus DP3 communication S7 317-2 DP and S7 214?

Created by: MaximNevmer at: 3/1/2010 1:07 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/1/2010 1:07 AM	Rate (0)
MaximNevmer Advanced Member Joined: 2/10/2010 Last visit: 11/21/2023 Posts: 35 Rating: (0)	Is it possible to have a Profibus DP3 communication of controller S7 317-2 DP (6ES7 317-6TJ10-0AB0) and controller S7 214 (6ES7 214-2BD23-0XB0) via communication module EM 277 (6ES7 277-0AA22-0XA0)?

Suggestion To thank Quote Answer

3/1/2010 7:59 AM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Hello, FAQ:How can you communicate data between the S7-200 and the S7-300 via PROFIBUS DP? Regards

Suggestion To thank Quote Answer

3/2/2010 6:04 AM	Rate (0)
MaximNevmer Advanced Member Joined: 2/10/2010 Last visit: 11/21/2023 Posts: 35 Rating: (0)	Thank you for usefull link. I have poor knowleges in creating CPU program.Can you get me some tips? how to create send/recive areas (Receive area S7-300: EB10 and EB11; Send area S7-300: AB10 and AB11; Receive area S7-200: VB100 and VB101; Send area S7-200: VB102 and VB103)? And thank you for help.

Suggestion To thank Quote Answer

3/2/2010 4:24 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 10/5/2024 Posts: 1162 Rating: (111)	Hello Max from Russia, Have you allready created the hardwareconfiguration? There you have to select the data area. It is nearly like you got I/O's within the central rack. Think it shouldn't be that difficult. If you need more assistance please post again. Good luck Sabine

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on