Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it possilble to create tags in Step7microwin and use them in Step7 and WinCC flexible?

Created by: SpaceBee at: 11/3/2010 12:53 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/3/2010 12:53 AM	Rate (0)
SpaceBee Posts: 23 Rating: (0)	thanks dchartier my friends i have one last doubt, as I synchronize tags between wincc and step7 i would like to know if it is possible to use the tags also from step7microwin. I mean that i create the tags in microwin and use them on step7 and winccflexible: step7microwin------>step7------>winccflexible thanks to all cheers! Splitted from no tag update from winccflexible runtime and step7 .
SpaceBee Posts: 23 Rating: (0)	Last edited by: O_Moderator at: 11/3/2010 1:35 PM new subject after splitting
Suggestion To thank Quote Answer

11/3/2010 9:29 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/27/2023 Posts: 8584 Rating: (1122)	Dear SpaceBee, Perhaps this thread might help: /tf/WW/en/Posts/24764 Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on