Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is the redundancy working using 2 IE General without the SOFTNET Software?

Created by: mhike at: 5/17/2010 10:56 AM (0 Replies)

Rating (0)

Thanks 0

1 Entries

5/17/2010 10:56 AM	Rate (0)
mhike Experienced Member Joined: 10/13/2008 Last visit: 11/11/2022 Posts: 41 Rating: (2)	Darius It should work. I don't see why it can't, but as in any other software redundancy case you will get lower speed of changing connection, poor diagnostics (if compare to REDCONNECT) and it will need extra configuring and script writing. Script is not so reliable as 'real' hardware sollution. So if it is ok for then I don't see any problems. Hi Darius, Is this case solved? Is the redundancy working using 2 IE General without the SOFTNET Software? Regards, mhike Splitted from WINCC redundant ethernet connection.
	Last edited by: O_Moderator at: 5/18/2010 10:13 AM new subject after splitting
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on