Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is there a way to copy mmc to mmc through pc?

Created by: PLC_Devil at: 9/5/2016 7:48 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/5/2016 7:48 AM	Rate (0)
PLC_Devil Posts: 16 Rating: (0)	Hi I want to copy data from mmc to new mmc via pc. The article below says that I have to either upload and archive mmc data from cpu or use Simatic Field PG to retrieve data from mmc. https://support.industry.siemens.com/tf/ww/en/posts/how-to-copy-the-mmc-s-data-to-a-new-mmc/123163/?page=0&pageSize=10 Is there other way than above like using mmc reader to copy the data and paste it on new mmc?
PLC_Devil Posts: 16 Rating: (0)	Last edited by: PLC_Devil at: 9/5/2016 9:04:34 AM
Suggestion To thank Quote Answer

9/5/2016 8:17 AM	Rate (0)
MAZENJER Silver Member Joined: 8/31/2013 Last visit: 9/22/2023 Posts: 604 Rating: (39)	Hello Or you can Use Siemens PG computer, Why you need these ? because MMC card is built as FAT 8 and the normal computer card reader does not give less than 32 FAT
	Warm Regards MAZENJER
Suggestion To thank Quote Answer

9/5/2016 9:07 AM	Rate (0)
PLC_Devil Posts: 16 Rating: (0)	My customer asked me whether they can just copy paste mmc data to new mmc via normal PC to easily create backups. And whats the solution other than Siemens PG computer?
PLC_Devil Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

9/5/2016 11:12 AM	Rate (0)
MAZENJER Silver Member Joined: 8/31/2013 Last visit: 9/22/2023 Posts: 604 Rating: (39)	There is no other solution
	Warm Regards MAZENJER
Suggestion To thank Quote Answer

9/5/2016 12:23 PM	Rate (0)
N. Vijay Silver Member Joined: 3/17/2013 Last visit: 8/8/2023 Posts: 480 Rating: (43)	Hi Check the below link https://support.industry.siemens.com/tf/ww/en/posts/how-to-copy-the-mmc-s-data-to-a-new-mmc/123163/?page=0&pageSize=10 N Vijay

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on