Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is there any body help me please ?

Created by: leegiang at: 12/17/2009 11:52 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/17/2009 11:52 PM	Rate (0)
leegiang Posts: 25 Rating: (0)	! when i download my program to PLC i have an error system fault.It could be from the OB1 block.Can any body check it for me? Best regard. Attachment TANK_CTRL.zip (30 Downloads)
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

12/18/2009 1:11 AM	Rate (0)
TEBANCH Silver Member Joined: 3/25/2008 Last visit: 1/28/2022 Posts: 232 Rating: (19)	Hi. I have tryed your program in simulation and i could not find anything wrong; ubder wich conditions it fails? Also you can check the diagnostics buffer of your CPU by following the next path in S7 managger: PLC>Diagnostic Settings>Module Infomation, and here you can select Diagnostics Buffer TAB. I hope this help, good luck.
	Keep working!
Suggestion To thank Quote Answer

12/18/2009 4:18 AM	Rate (0)
leegiang Posts: 25 Rating: (0)	Dear TEBANCH, Thanks you so much for your help.I will try my best. Best regard.
leegiang Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on