Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is there any way not to use Back plane connector for ET200M?

Created by: hdhosseini at: 9/25/2010 7:29 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

9/25/2010 7:29 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 9/24/2023 Posts: 6821 Rating: (1349)	Dear Wizard please check the following attachment for a sample ET200M configuration in STEP7.How modules should be arranged on 6ES7 195-7HB00-0XA0 ? Is there any way not to use Back plane connector for ET200M? The maximum module number on the 6ES7 195-7HB00-0XA0 is 5 but I saw 7 modules on a ET200M! Best regards Splitted from ET200 RACK BACK PLANE . Attachment ET200M.zip (39 Downloads)
	Last edited by: O_Moderator at: 9/27/2010 10:26 AM new subject after splitting Demo Channel on Youtube
Suggestion To thank Quote Answer

9/26/2010 11:43 AM	Rate (0)
ROCLIM Posts: 42 Rating: (1)	Dear hdhosseini I think the module in the picture you attaches is the combination of 6ES7 195-7HA00-0XA0 and 6ES7 195-7HB00-0XA0 and 6ES7 195-7HC00-0XA0. ROCLIM
ROCLIM Posts: 42 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

9/27/2010 9:15 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/14/2023 Posts: 8592 Rating: (1132)	hdhosseini Is there any way not to use Back plane connector for ET200M? Dear hdhosseini, When you want a Redundant ET200M station or use Hot Swappable functionality, you need the active backplane. When ET200M is a standalone slave, you do not have to use Active Backplane. hdhosseini The maximum module number on the 6ES7 195-7HB00-0XA0 is 5 but I saw 7 modules on a ET200M! Like ROCLIM already mentioned, the picture shows the different modules. The maximum number of 6ES7 195-7HB00-0XA0 is 5 pieces. In one busmodule 6ES7195-7HB00-0XA0, you can place two I/O cards (40mm ) Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on