Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is TP700 COMFORT compatible with LOGO24RCO?

Created by: Sukhwinder S at: 2/5/2021 6:32 AM (4 Replies)

Rating (2)

Thanks 1

5 Entries

2/5/2021 6:32 AM	Rate (0)
Sukhwinder S Posts: 23 Rating: (0)	Hi I Sukhwinder Singh is it HMI TP -700 -COMFORT compatibility with LOGO24RCO ------------------------------------------------------------------------------------------ Split from LOGO! replacement.
Sukhwinder S Posts: 23 Rating: (0)	Last edited by: Jen_Moderator at: 02/05/2021 10:22:57 New subject after splitting
Suggestion To thank Quote Answer

2/5/2021 6:32 AM
Sukhwinder S Posts: 23 Rating: (0)	Hi I Sukhwinder Singh is it HMI TP -700 -COMFORT compatibility with LOGO24RCO
Sukhwinder S Posts: 23 Rating: (0)
Suggestion Quote Answer

2/5/2021 6:51 AM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/6/2024 Posts: 34358 Rating: (4279)	Which 24RCo? 0BA6? 0BA7? 0BA8?

Suggestion To thank Quote Answer

2/6/2021 6:54 AM	Rate (0)
Sukhwinder S Posts: 23 Rating: (0)	LOGO MLFB Details LOGO24RCO 6ED1 052-2HB00-0BA6
Sukhwinder S Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

2/6/2021 7:08 AM	Rate (2)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/6/2024 Posts: 34358 Rating: (4279)	No. The 0BA6 has no bus system for comunication with a TP 700 Comfort. Edit: If you consider the costs of a TP 700 Comfort and the costs for WinCC TIA Comfort / Advanced, then you should also pay for a current LOGO! 0BA8 must be present. With the current LOGO! it is no problem to set up communication with a TP 700 Comfort via Ethernet.
	Last edited by: ixo65 at: 02/06/2021 07:14:46
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sukhwinder S

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on