Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

It's possible to delete files on NC through PCIN batch commands?

Created by: Tulio Colmanetti at: 1/4/2013 11:58 AM (8 Replies)

Rating (1)

Thanks 0

9 Entries

1/4/2013 11:58 AM	Rate (0)
Tulio Colmanetti Posts: 5 Rating: (0)	Hello, I would like to know if it's possible to delete files that are at numeric control (NC) through PCIN batch commands. I know that it's possible to do that using functions ofthe interface menu, but we have a need to work with PCIN through batch commands. As an alternative, there is a way to configure the NC to automatically delete used files after the operation of the machine has been completed? Thanks in advance!
Tulio Colmanetti Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/4/2013 1:25 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	I would like to know if it's possible to delete files that are at numeric control (NC) through PCIN batch commands. I know that it's possible to do that using functions ofthe interface menu, but we have a need to work with PCIN through batch commands. As an alternative, there is a way to configure the NC to automatically delete used files after the operation of the machine has been completed? Thanks in advance! Hello, Nice thinking....iappericate it....but as far as i understand it is not possible.... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

1/4/2013 2:33 PM	Rate (0)
Tulio Colmanetti Posts: 5 Rating: (0)	So, just to see if i understood, the only way to delete files on NC is manually through an user interface? Regards
Tulio Colmanetti Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/4/2013 5:54 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, You can delete the data i mean NC default data by using HMI software PC/PG or with the S3 switch on the NCU card by keeping it to 1 and switch ON Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

1/4/2013 8:09 PM	Rate (0)
Tulio Colmanetti Posts: 5 Rating: (0)	Ok, i appreciate your help. Thanks
Tulio Colmanetti Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/5/2013 9:52 AM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 2/9/2025 Posts: 992 Rating: (64)	Hi, You can delete files with the DELETE command from within a part program. You can also selecl and run a program that deletes other part programs. Pee

Suggestion To thank Quote Answer

1/7/2013 12:40 PM	Rate (0)
Tulio Colmanetti Posts: 5 Rating: (0)	Hi, Thanks for the reply. Could you send me a link where I can find referencesor examples of the use ofDELETE and other commands within part programs? The program used to delete another part programs would be an ordinary part program (like a .MPF) or a specific type of program (like a .INI or Cycle Program)? Regards
Tulio Colmanetti Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/7/2013 1:25 PM	Rate (1)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 2/9/2025 Posts: 992 Rating: (64)	Hi, I've assumed it's an 840D control. The command can be in a normal mpf. https://www.automation.siemens.com/doconweb/pdf/SINUMERIK_SIMODRIVE_04_2010_E/PGA.pdf?p=1#page=1&view=FitBH,0&pagemode=none

Suggestion To thank Quote Answer

1/7/2013 2:55 PM	Rate (0)
Tulio Colmanetti Posts: 5 Rating: (0)	Right, I found the DELETE command. Maybe that could be a solution. Thanks for the help.
Tulio Colmanetti Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on