Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KP400_Basic_Arrow

Created by: Otto_O at: 5/12/2014 1:39 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/12/2014 1:39 PM	Rate (0)
Otto_O Advanced Member Joined: 6/4/2013 Last visit: 1/6/2023 Posts: 52 Rating: (0)	Hello, Im working on project on which I need to use KP400 basic PN. This OP has Arrows. Two arrows Up and Down, and two arrows Left and Right. How can I use arrows Left and Right to move from one I/O field to another I/O field. To move up and down it works, but to move left and right it dosent. I made a "table" with I/O fields. In each I/O field will be entered a number. Now I can move up and down, but only on first (up left) and second (down left) I/O field. Attachment Table.jpg (217 Downloads)

Suggestion To thank Quote Answer

5/15/2014 8:06 AM	Rate (0)
Otto_O Advanced Member Joined: 6/4/2013 Last visit: 1/6/2023 Posts: 52 Rating: (0)	Hello, Now I become KP400 and it is working. But on simulator it doesnt.

Suggestion To thank Quote Answer

5/15/2014 9:52 PM	Rate (0)
VVago Posts: 784 Rating: (52)	Otto_O Hello, Now I become KP400 and it is working. But on simulator it doesnt. Hello, Can you explain your problem little bit? Best regards.......
VVago Posts: 784 Rating: (52)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on