Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KTP 600 and Drive communication

Created by: Rudrani at: 6/14/2013 12:46 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/14/2013 12:46 PM	Rate (0)
Rudrani Posts: 163 Rating: (4)	Hi all, I have a KTP 600 and a G120. I want to display the error and warning text directly on HMI. I have established the communication. but in the alarm window on HMI, it is displayed that " Alarms can't be restored from the alarm buffer". Is this because of KTP 600 is not compatible for drive communication?... and which HMI can be configured in such a way?....... pls reply Regards Rudrani
Rudrani Posts: 163 Rating: (4)
Suggestion To thank Quote Answer

6/14/2013 5:14 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating: (710)	Hi Rudrani, Maybe this can help you: How do you insert error messages of a frequency converter How do you establish a direct connection between HMI Panels and ...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on