Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KTP-600 BASIC MONO PN

Created by: girish bodhale at: 3/13/2014 8:42 AM (2 Replies)

Rating (1)

Thanks 2

3 Entries

3/13/2014 8:42 AM	Rate (0)
girish bodhale Posts: 51 Rating: (1)	Hi Forum, I Am having KTP-600 Basic mono PN HMI, Customer request is that, He should beable to, 1) Create User & asign password 2) Change Password Of existing User 1st of all is this possible, If yes then how do i do it. Please Help. Am using ET200S series, CPU151-8 PN/DP with the above said HMI.
girish bodhale Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

3/13/2014 9:45 AM	Rate (1)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	Hello, Yes it's possible. You create users in the user administration. You create a screen with a user view. Create a button to open this screen. A member of the administrator group can now edit users in runtime. See attached picture for more details. Regards, Marcjan Attachment user.JPG (80 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users girish bodhale

3/13/2014 10:34 AM	Rate (0)
girish bodhale Posts: 51 Rating: (1)	Thanks For the reply I tested it? It works fine? Thanks a lot
girish bodhale Posts: 51 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

|

Share this page:

Share this page on...

Follow us on