Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KTP1000 basic PN - Operating system not booting

Created by: moconnor at: 8/19/2014 2:35 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/19/2014 2:35 PM	Rate (0)
moconnor Member Joined: 8/19/2014 Last visit: 1/9/2025 Posts: 1 Rating: (0)	While I was updating the os in TIA Portal I got a message saying that the update was aborted. Now, when I power up the HMI it just stays on the on the white screen showingthe MAC address, etc. The progress bar to show that the os is booting does not appear. Also, in TIA Portal the HMI now appears as 'ktp1000basic_bootloader [mac address]'. Any ideas how to load the os again?
	Last edited by: moconnor at: 8/19/2014 2:36 PM
Suggestion To thank Quote Answer

8/19/2014 3:29 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, see this article: http://support.automation.siemens.com/WW/view/en/19701610chapter 1.2.1
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on