Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KTP600 PN IP assign error

Created by: OMKRIS2017 at: 1/2/2017 11:52 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/2/2017 11:52 AM	Rate (0)
OMKRIS2017 Bronze Member Joined: 1/1/2017 Last visit: 2/17/2025 Posts: 337 Rating: (11)	Hello Guys! Presently I've a KTP 600 PN & whenever I'm trying to assign the IP to it via Edit Ethernet Node option it's showing some peculiar error. It's showing: "An unknown error occurred. please check the specified addresses & try again." The IP I'm assigning is 10.22.1.2. Other IP I've also tried but it's not working. Please help. regards Krishna Attachment Error_HMI.png (70 Downloads)

Suggestion To thank Quote Answer

1/3/2017 10:06 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 2/17/2025 Posts: 3123 Rating: (519)	Hello Krishna, maybe the last post here helps: https://support.industry.siemens.com/tf/WW/en/posts/error-4502-686/125064?page=0&pageSize=10 Best regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on