Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KUKA and S7-1200

Created by: sbartoc at: 12/3/2014 5:59 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

12/3/2014 5:59 PM	Rate (0)
sbartoc Bronze Member Joined: 3/3/2014 Last visit: 3/21/2023 Posts: 229 Rating: (8)	Good Evening everybody, I have a project based on s7300 and some FC/FB(most of in AWL code) that I need in order to communicate with a KUKA Robot. I was wondering me, If I want to change the PLC with an s7-1200, how can I establish the communication between PLC and robot if those function are written in AWL code? Thanks in advance

Suggestion To thank Quote Answer

12/3/2014 6:15 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 3/16/2023 Posts: 1498 Rating: (217)	sbartoc Good Evening everybody, I have a project based on s7300 and some FC/FB(most of in AWL code) that I need in order to communicate with a KUKA Robot. I was wondering me, If I want to change the PLC with an s7-1200, how can I establish the communication between PLC and robot if those function are written in AWL code? Thanks in advance Hello sbartoc, My suggestion would be to go with a CPU 1511 or CPU 1510, where both of them support STL (AWL). S7-1200 and STL is not possible.
	Like it? Rate it!
Suggestion To thank Quote Answer

12/3/2014 8:20 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (994)	sbartoc Good Evening everybody, I have a project based on s7300 and some FC/FB(most of in AWL code) that I need in order to communicate with a KUKA Robot. I was wondering me, If I want to change the PLC with an s7-1200, how can I establish the communication between PLC and robot if those function are written in AWL code? Thanks in advance S7-1200 do not support STL (AWL). You must change to SCL or FBD (FUP), or do not change over to 1200.
IBN-Service Posts: 8946 Rating: (994)
Suggestion To thank Quote Answer

12/3/2014 9:39 PM	Rate (0)
William_B Posts: 5225 Rating: (1165)	sbartoc Good Evening everybody, I have a project based on s7300 and some FC/FB(most of in AWL code) that I need in order to communicate with a KUKA Robot. I was wondering me, If I want to change the PLC with an s7-1200, how can I establish the communication between PLC and robot if those function are written in AWL code? Thanks in advance Hi. The S7-1200 is a good option to have for what you want to do.. but you will have to convert to something other than STL (as already stated). How complicated is your code?.. would you feel comforatble with converting all your work to SCL instead? The question comes up - why do you wish to move away from the S7-300? You could consider using an ET200 in a standalone configuration. If you need more information on this option - feel free to ask the guys here. Greetings. w
William_B Posts: 5225 Rating: (1165)	Last edited by: William B. at: 12/3/2014 9:41 PM The above is expanding on what IBN-Service said.
Suggestion To thank Quote Answer

12/4/2014 8:12 AM	Rate (0)
sbartoc Bronze Member Joined: 3/3/2014 Last visit: 3/21/2023 Posts: 229 Rating: (8)	Thank you to everybody for the quickly answers. I asked this because I have a similar project under development, but based on S7-1200. I forgot one important thing. I have to communicate via profinet.
	Last edited by: sbartoc at: 12/4/2014 8:34 AM Last edited by: sbartoc at: 12/4/2014 8:34 AM
Suggestion To thank Quote Answer

12/4/2014 12:19 PM	Rate (0)
sbartoc Bronze Member Joined: 3/3/2014 Last visit: 3/21/2023 Posts: 229 Rating: (8)	Everything I needed was here and in particular the manul that explain everything is this one

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users William_B

|

Share this page:

Share this page on...

Follow us on