Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Language in Static Text

Created by: RasaIcce at: 4/18/2008 2:17 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/18/2008 2:17 PM	Rate (0)
RasaIcce Posts: 32 Rating: (0)	I have a problem with language in WinCC. When I change language in static text show ????,why? I write static textinenglishandthesametextputintoTextLibrarybutIget????. When i create .csv file ,how and were import this file? Can you explain more precision,please.
RasaIcce Posts: 32 Rating: (0)
Suggestion To thank Quote Answer

4/18/2008 2:39 PM	Rate (0)
BadBit Posts: 125 Rating: (26)	Hi, You can use "Easy Language" to import/exportstatic textinto/from CSV - file. If this Tool installed (WinCC Setup -> Smart Tools), you will find this external tool in : "Start > SIMATIC > WinCC > Tools" Regards
BadBit Posts: 125 Rating: (26)
Suggestion To thank Quote Answer

4/18/2008 7:54 PM	Rate (0)
candyengineer Silver Member Joined: 5/17/2006 Last visit: 2/26/2024 Posts: 218 Rating: (26)	Hello all, If Im not wrong , you need to write for every static text in language you wanna translate. For example: if there are 3 static texts english norwegian statictext1 statictext1 statictext2 statictext2 statictext3 statictext3 if you didnt write in language you wanna use, static text will appear like "????" Best regards.
	Genetic Fuzzy PID Controller
Suggestion To thank Quote Answer

4/23/2008 10:10 AM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 10/9/2024 Posts: 550 Rating: (62)	Try to check the server name if it is not the same as the PC you are configurring
	Best Regards
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on