Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

learn how to alarm on wincc flexible

Created by: boazeventall at: 5/10/2012 10:40 AM (26 Replies)

Rating (2)

Thanks 5

Result pages:: |; 1 | 2 | 3; |

27 Entries

Entries per page: 10 | 20 | all

5/10/2012 2:44 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Wizard You are correct. Only we start with Alarm 1 My bad..
	Best regards, Darius
Suggestion To thank Quote Answer

5/10/2012 2:54 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/18/2024 Posts: 8770 Rating: (1171)	Darius Wizard You are correct. Only we start with Alarm 1 My bad.. Hello Darius, It can happen. We are all human beings. (I'm glad I can make mistakes too) And you are doing a great job lately, so it is possible. Best regards, Wizard

Suggestion To thank Quote Answer

5/10/2012 4:11 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 11/5/2024 Posts: 2957 Rating: (242)	Wizard It can happen. We are all human beings. (I'm glad I can make mistakes too) And you are doing a great job lately, so it is possible.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

12/14/2012 10:43 PM	Rate (0)
Gabe A, Posts: 8 Rating: (0)	Darius boazeventall he does not execist see at the pic Yes, now I saw that you use S7-1200 PLC. It has no possibility to use STL, so ok in LAD it should be: --\|M0.0\|------------------------------(S DB1.DBX0.0) --\|M0.1\|------------------------------(S DB1.DBX0.1) Hope it is clear enough This might be a dumb question, but if the alarm bits are already in M0.0 and M0.1 could you not then use MW0 for alarm word and bit 0 and 1 for the alarm bits? I am trying to structure a large program right now and I would like to know if this would work. Thanks, Gabriel
Gabe A, Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

12/19/2012 11:22 AM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Can you explain more what you want to do? Which PLC do you use? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

2/10/2013 8:43 PM	Rate (0)
zarezare1 Posts: 6 Rating: (0)	Hi, all! I read all previous posts, but I did not succed to alarm on wincc flexible with your advice. I saw help topics you linked and used library with "Bool to word" and "Word to bool" blocks. With "Bool to word" block I group 16 digital inputs(for example I0.0 to I1.7) in word, but memory word (for example MW20) instead of your DB....addresses ( I did not understand this very well ) . In wincc flexible it seems all works fine, I succeded to alarm calling appropriate trigger bit from word MW20... Question: Is this regular option for alarming? May I continue use this way of alarming? Can this cause some problems in monitoring later? If I understand all this with memory addresses, I only change values of memory bit from 0 to 1 and vicer versa, nothing else. Thanks in advance! Zare
zarezare1 Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

2/11/2013 12:02 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, You can find more information about alarms. See the chapter 2.4.2.3 SIMATIC HMI WinCC flexible 2008 Communication Part 1 See chapter 6. SIMATIC HMI WinCC flexible 2008 WinCC flexible 2008 Compact/ Standard/ Advanced See chapter 4. SIMATIC HMI WinCC flexible 2008 Getting Started - First-Time Users Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

27 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on