Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LED stays orange after power up

Created by: rebbcamarks at: 12/26/2018 11:09 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

12/26/2018 11:09 AM	Rate (0)
rebbcamarks Posts: 3 Rating: (0)	I'm also having issues with my PLC s7-1200 CPU 1211C, after I associated with 24VDC LED status just turn on Run/Stop LED, yet in orange shading, not Green, my PLC is new and I don't how to settle It. ------------------------------------------------------------------------------------------ Split from s71200 to a led sign.
rebbcamarks Posts: 3 Rating: (0)	Last edited by: Jen_Moderator at: 12/26/2018 8:17:32 PM New subject after splitting
Suggestion To thank Quote Answer

12/26/2018 12:23 PM	Rate (1)
#dP Posts: 2826 Rating: (688)	Hello. rebbcamarks I'm also having issues with my PLC s7-1200 CPU 1211C, after I associated with 24VDC LED status just turn on Run/Stop LED, yet in orange shading, not Green, my PLC is new and I don't how to settle It. It sounds as if the PLC is in stop mode. Switch the PLC to RUN mode by using the online tools. There is a setting that can make the PLC go to RUN when you switch power on. This setting is different than the default: see the image. BR Attachment Untitled.png (603 Downloads)
#dP Posts: 2826 Rating: (688)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Med_selmi

12/27/2018 11:06 AM	Rate (0)
rebbcamarks Posts: 3 Rating: (0)	Let me Try and update you the same.. Thank you very much for you answer.
rebbcamarks Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on