Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

license manager not starting

Created by: ivan_euler at: 8/1/2007 6:32 AM (5 Replies)

Rating (2)

Thanks 0

6 Entries

8/1/2007 6:32 AM	Rate (0)
ivan_euler Posts: 54 Rating: (0)	when i try to run the licence manager it does not start it says that i should start the service..But even if i start the service it automatically goes off .... what is hapenning to the license manager ...i could not start s7
ivan_euler Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

8/1/2007 7:01 AM	Rate (1)
Dorftrottel? Silver Member Joined: 8/10/2006 Last visit: 5/3/2023 Posts: 297 Rating: (29)	Does it have any dependencies other than RPC & Server? They are required ones, and if not running, the ALMService will start and shut down. It will attempt to start them first, though. Do you have any security software that does not allow it to run?

Suggestion To thank Quote Answer

8/1/2007 7:15 AM	Rate (0)
ivan_euler Posts: 54 Rating: (0)	i have check the services and i think both is working ....i do not have any security ...is it okay to reinstall the simatic manager without comprimising the licenses....i need help urgently
ivan_euler Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

8/1/2007 8:59 AM	Rate (1)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	Hi, I guess you have seen this faq: http://support.automation.siemens.com/WW/view/en/18865336 Try to deinstall ALM and proceed as told at point 8 of above link. Best regards, Wizard

Suggestion To thank Quote Answer

8/2/2007 6:01 AM	Rate (0)
ivan_euler Posts: 54 Rating: (0)	thanks for the link its now working
ivan_euler Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

8/2/2007 8:44 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 5/16/2023 Posts: 8586 Rating: (1127)	You are welcome I'm glad everything is working now. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on