Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

License not adequate

Created by: AutoGen_681742 at: 4/5/2019 12:53 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

4/5/2019 12:53 PM	Rate (0)
AutoGen_681742 Regular Member Joined: 4/28/2015 Last visit: 1/4/2024 Posts: 36 Rating: (1)	Hello! I have a CF card with number 6SL3054-0EH00-1BA0-Z, it is upgraded to 4.8.63.13. Can i change to this 6SL3054-0EJ01-1BA0 without any problems? Best Regards

Suggestion To thank Quote Answer

4/5/2019 12:57 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/11/2024 Posts: 22410 Rating: (3017)	Hello, the 6SL3054-0EH00-1BA0-Z is with performance Licence , a change to 6SL3054-0EJ01-1BA0 lost the licence. So if you need the performance Option on your system you must install a performance licence to the new card. And you should lock that on the 6SL3054-0EJ01-1BA0 the same FW is installed like the old card. From the catalog date on the 6SL3054-0EJ01-1BA0 ist FW V4.7. Regards Christoph

Suggestion To thank Quote Answer

4/8/2019 12:06 PM	Rate (0)
AutoGen_681742 Regular Member Joined: 4/28/2015 Last visit: 1/4/2024 Posts: 36 Rating: (1)	Hi, yes this card was a 4.7 but is 'upgraded' to 4.8 due to we use the Startdrive Option software in TIA v14. By this we could use a CU320-2 PN together with TO. But now, we have extended the drives from 4 to 6 and we now use 4 of them with safety and what i understand the limit is 3 axes with safety if you have a card without the perfomance package. I also got the error A13000 with 0 as alarm value.

Suggestion To thank Quote Answer

4/8/2019 12:21 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 10/11/2024 Posts: 22410 Rating: (3017)	Hello, the performance licence is need from the 4th axis (SERVO/VECTOR) or 7th Axis (U/F) . For safety you need a another licence , the performance licence have nothing to do with safety ! Regards Christoph

Suggestion To thank Quote Answer

4/10/2019 12:08 PM	Rate (0)
AutoGen_681742 Regular Member Joined: 4/28/2015 Last visit: 1/4/2024 Posts: 36 Rating: (1)	ChristophD Hello, the performance licence is need from the 4th axis (SERVO/VECTOR) or 7th Axis (U/F) . For safety you need a another licence , the performance licence have nothing to do with safety ! Regards Christoph Ok. Since I have more than 3 SERVO/VECTOR axes for sure I need to change the license. What is the best way to get that?

Suggestion To thank Quote Answer

4/10/2019 12:26 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 10/13/2024 Posts: 4179 Rating: (467)	Contact your local Siemens sales office.

Suggestion To thank Quote Answer

4/11/2019 4:35 PM	Rate (0)
AutoGen_681742 Regular Member Joined: 4/28/2015 Last visit: 1/4/2024 Posts: 36 Rating: (1)	Hati Contact your local Siemens sales office. Done :-)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on