Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

LINE CONTACTOR CONTROAL SLM 16KW WITH SINUMERIK 840DSL

Created by: Import-User-1 at: 4/8/2010 8:31 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/8/2010 8:31 AM	Rate (0)
Import-User-1 Posts: 3609 Rating: (28)	Import of a Technical Question of an User bendari wrote: Hi I’m making commissioning for 4 axis milling machine(x,y,z,sp) with sinumerik 840dsl NCU720.2 with sys S/W 6 axis and shopmill version 1.5 SP1 HF1 export . I want to make line contactor control for the SLM "16 KW with drive cliq interface " but we have alarm 207300 "DP003 slave 003:SLM_3:3:2(2) drive line contactor feed back signal missing i already made the following : 1- Connect control terminal of the line contactor to X 132.10 in NCU 2- Connect feed back of the line contactor to X 132.4 in NCU 3-changed the bico inter connection for p0744=r0863.1 & P0860=r0723.7 4- Set p0861=100ms could you advice me how can i solve this problem?
Import-User-1 Posts: 3609 Rating: (28)
Suggestion To thank Quote Answer

4/8/2010 9:13 AM	Rate (0)
CNC600 Silver Member Joined: 10/27/2009 Last visit: 11/30/2023 Posts: 455 Rating: (76)	Hi, Your OUTPUT-signal at X132.10 (to control the contactor): p744=X:863.1 ==> OK did You set pin X132.10 as an OUTPUT? ==> bit p728.14 = TRUE (please check this setting) Your INPUT-signal at X132.4 (response from contactor): X:p860 = 1:722.7 ==> (please check this setting) (X=DO number of Line Module) ********************** time delay for alarm "p0861=100ms" : perhaps a little bit to short, better: 500ms hope that helps CNC600
	Last edited by: CNC600 at: 4/8/2010 9:26 AM hope that helps CNC600
Suggestion To thank Quote Answer

4/8/2010 5:57 PM	Rate (0)
bendari Member Joined: 10/26/2008 Last visit: 3/17/2013 Posts: 2 Rating: (0)	hi thanks, it works now, i changed P0860=r0722.7 to be = r0723.7 then it be ok

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on