Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Linear Scale to PLC AXIS

Created by: List at: 3/27/2013 11:52 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/27/2013 11:52 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai All, Controller : 802D sl. Application : Vertical Machining. Is it possible to interface linear scale to a PLC axis defined in a 802D sl controller. One special pupose in Application is defined as PLC Axis and have to interface Linear scale to this axis.Is it possible.?? Please share What are the procedures? Thanks & Regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

4/5/2013 8:50 AM	Rate (0)
hardik_vmservices Regular Member Joined: 5/25/2009 Last visit: 7/3/2024 Posts: 32 Rating: (1)	i think it should be work. only axis not programmed and it is not interpolating.

Suggestion To thank Quote Answer

4/5/2013 1:55 PM	Rate (0)
List Posts: 664 Rating: (17)	Hello Hardik, Thanks for your reply ... Do you have any docs regarding the scale interfacing to PLC axis ? If yes Please share with me... Thanks and regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on