Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Linear Scaling in WinCC

Created by: RX100 at: 3/13/2009 12:12 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

3/13/2009 12:12 PM	Rate (0)
RX100 Posts: 53 Rating: (0)	DearExperts, I am using S7300 CPU and WinCC V6.2.All I need to do is to enter a valuein Minutes inRuntimeon WinCC and get the same value on the S5Timer on PLC. The data formaton data block is obviously S5Time.I tried every possible thing that I could but of no use. Can anyone please help me ASAP. Thanks v much Navs
RX100 Posts: 53 Rating: (0)
Suggestion To thank Quote Answer

3/13/2009 3:27 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 3/8/2023 Posts: 703 Rating: (96)	Hello, just linear scaling itselfwon't help with this conversion. The easiest way is to declare the TIME variables in PLC, this could be comunicated with WinCC as doubleinteger (number of miliseconds so there you could use linear scaling). In the PLC use for conversion the Standard library IEC functions TIM_S5TI (Fc40) and S5TI_TIM (Fc33). Regards Sydney

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users RIAN Che mugurelgi5

3/13/2009 6:33 PM	Rate (0)
RX100 Posts: 53 Rating: (0)	Dear Sydney, Thank you very much for your cooperation. It worked!!! Excellent!!!
RX100 Posts: 53 Rating: (0)
Suggestion To thank Quote Answer

3/13/2009 8:44 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 3/8/2023 Posts: 703 Rating: (96)	You're welcome

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on