please see  the attachment !

i have X0=1 (network in OB100) and X50=1 (network in OB1) 

When i put  my login and my password In the HMI ,i want that the PLC must activate X1  

how to do it ?

mamadou13

please see  the attachment !

i have X0=1 (network in OB100) and X50=1 (network in OB1) 

i have already set the user management 

When i put  my login and my password In the HMI ,i want that the PLC must activate X1  

how to do it ?

Have a look at..   [LINK]

Especially the picture at date-code 12/3/2014 4:58 PM.
I hope you reward Jens_app with some stars. (wink)
w

i want that the operator1 after loging on succesfully do his work for 5 minutes ,if 5 minutes passed and the cycle is not finished yet , plc must continue working until the end of cycle(X43=1)

this can be translated into Boolean logic:

5minutes_passed * X43=1 =>loging out automaticly and forcing the grafcet to the initial state (X0=1).

and so on with the operator2..

Please i need your help guys ?

Closed cause question posted twice.

The second thread with the subject link between network and HMI is published within the conference SIMATIC WinCC (TIA Portal).

Best regards
Min_Moderator