Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Link two Netpro connections from separate projects

Created by: ClaPet at: 11/16/2009 2:40 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/16/2009 2:40 PM	Rate (0)
ClaPet Posts: 26 Rating: (0)	Hi, To connecttwo PLCs (communicating to one another over ethernet) in the same project is easy. But how do you this if the PLCsare in separate projects. Inthe1stproject I insert an "Other Station" which matches the PLC in the 2nd project. I create a connection (but there is no "Partner ID"). I did the same for the 2nd project. Now, how do I link the NetPro connections? I know that you cando this by creating aMultiproject. Can you please let me know if there is an example on how to link the connections, using Step 7 Multiproject? Isthere another way? Kind Regards
ClaPet Posts: 26 Rating: (0)
Suggestion To thank

11/16/2009 8:12 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already published in the thread with the subject Link two PLCs (separate projects) over Ethernet. Best regards O_Moderator
	Last edited by: O_Moderator at: 11/17/2009 7:15 AM link edited Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on